what to do if rave light up speaker wont turn on
HyperGear Wireless
Portable Wireless Speaker
User Manual
WARRANTY INFORMATION
HyperGear warranties this product against all defects in fabric and/or workmanship under normal use for a catamenia of Ane (one) YEAR from the date of purchase by the original purchaser.
Contact [email protected] to submit a warranty claim. Proof of purchase is required.
Important
Read all prophylactic instructions and warnings prior to using this product. Improper apply and failure to follow condom guidelines could event in damage, excess heat, toxic fumes, burn down, explosion, electrical stupor or other hazards causing serious and/or fatal injury and/or property damage and not the manufacturer's responsibility. The user is responsible for maintaining this production with treat maximum use.
- Practice not store in a depleted country. Battery cells may exist damaged. Charge your unit at to the lowest degree in one case every 3 months even when not in employ.
- Avoid excessively loud listening levels, especially for extended periods of fourth dimension, as it tin cause permanent hearing damage.
- Maintain volume levels that will allow you to hear sound around you and be alerted to potentially chancy situations.
- Exercise non store at farthermost temperatures (beneath forty˚ F or to a higher place ninety˚ F)
- Recharge your device with the included Micro USB charging cable or a certified tertiary political party cable and a 2A charging adapter. Standard cables and adapters may accuse the bombardment too slowly and damage/overheat the battery or cause a burn down hazard.
- This product is not a toy – go on this product WARRANTY Data and all component parts out of the reach of children.
- Do not endeavour to modify, disassemble, or repair this product.
- Avoid excessive drops, bumps, abrasions, and crude treatment of the cords and cables.
- If the unit of measurement has dents, punctures, tears, deformities, or corrosion, discontinue use and contact the manufacturer or dispose of in an advisable method.
- Under any circumstances, if yous notice this product rapidly increasing in temperature, emitting odor, or demonstrating an abnormal miracle, discontinue use immediately.
- Disposal of unit in the garbage is unlawful under country and federal environmental laws and regulations.
- Unit is non waterproof. Exercise not clean with harsh chemicals, soaps or detergents or submerge.
Prop 65: This product may contain chemicals known to the State of California to crusade cancer and nativity defects or other reproductive harm.
TROUBLESHOOTING
Q: My speaker will not plow on.
A: Your speaker may exist low or out of power. Connect to a power source. The LED light will show whether it is charging. Fully charge before use.
Q: My speaker will not pair.
A: Check that your speaker is turned on.
A: Check that your source device has the Bluetooth part activated then follow its pairing instructions.
A: Check that your speaker is in Pairing Mode, and are not automatically pairing to some other device.
A: Your speaker may be out of range. Move closer to your source device.
A: The battery ability may exist too low on your speaker, source device, or both. Fully charge every bit needed.
Q: I have already paired with my device, but I cannot hear any music.
A: Your speaker may exist out of range. Movement closer to your source device.
A: Y'all may be in a different sound source mode. Press the Manner push button to switch between audio sources.
A: The volume on your source device may be muted. Check that your device is playing at audible levels.
A: Accommodate the volume level directly on your mobile device. Note: Some apps and programs have their own sound settings separate from the general device settings. Make certain to adjust those too, as needed.
A: The battery power may be too low on your speaker, source device, or both. Fully charge as needed.
A: Effort a "soft reset" by powering your speaker off then on.
A: Attempt re-pairing. First delete the speaker from your listing of discovered Bluetooth devices selecting "Forget this Device" for iOs/Apple, or "Unpair" for Android, then follow our pairing instructions.
Q: The sound is too low/too high/poor quality.
A: Your speaker may be out of range. Motility closer to your source device.
A: Arrange the volume level directly on your mobile device. Note: Some apps and programs take their own audio settings separate from the general device settings. Make sure to adjust those too, equally needed.
A: Move away from or turn off nearby devices that may be generating interference, such equally some other Bluetooth device or wireless router.
A: Try turning off Wi-Fi on your source device to improve sound quality.
A: Endmost non-essential applications on your source device may better sound quality. Running multiple applications can reduce the amount of internal resources bachelor to transmit audio clearly.
A: Try a "soft reset" past powering your speaker off then on.
For boosted customer support and technical assistance, please electronic mail [email protected]
Instruction
Fully accuse your speaker before first employ.
How to Charge
Using the included Micro USB charging cablevision to connect your speaker to a USB power source (such equally a USB wall adapter, computer USB port, etc.).
Once plugged in, the LED power indicator will light upwardly RED. When charging is complete, the LED will plow OFF (approximately three hours).
How to Pair
Make sure that your speaker's Power ON/OFF switch is in the OFF position (LEFT).
Slide the power switch RIGHT to turn the speaker ON. The Blue LED light ring with wink Blueish to point pairing manner. It will search for Bluetooth devices automatically.
Using the Bluetooth bill of fare on your device (telephone, tablet, etc.), enable searching for nearby Bluetooth devices. Please refer to your device's user manual for more details.
Select "HyperGear BT Speaker" from the list of discovered devices, connect and pair to it. If your device prompts for a Pivot lawmaking, enter "0000". The BLUE low-cal ring volition disappear and you will hear a tone confirming the successful pairing.
Your speaker is set up for wireless utilise!
Note: The speaker will automatically reconnect to the last paired Bluetooth audio device when the unit is turned on.
How to Play via Micro SD Menu
Turn the speaker ON. Firmly insert the Micro SD card into the designated slot. Your music will automatically play.
Notation: Press the Way Button to switch between Bluetooth and Micro SD Carte mode equally needed.
NOTE: The blue LED ring volition light up and flash continuously when the speaker is actively in use. The light will turn off to conserve battery life when in stand-past mode, just will light up to alarm y'all of incoming calls or messages.
Give thanks yous for purchasing the HyperGear Portable Speaker!
Please read this manual thoroughly and continue it for future reference.
Visit www.myhypergear.com to learn more about your new speaker or other HyperGear products.
HyperGear Wireless Portable Speaker User Manual – Optimized PDF
HyperGear Wireless Portable Speaker User Manual – Original PDF
Source: https://manuals.plus/hypergear/hypergear-wireless-portable-speaker-user-manual
0 Response to "what to do if rave light up speaker wont turn on"
Post a Comment